![]() ![]()
When a factory-reset device is first powered on it will check for specific DHCP Options that may be defined on the network which would provide a path to the provisioning server. In this article a basic FTP server will be used but the phones also support the TFTP, HTTP, and HTTPS protocols. #Polycom configuration file generator tool softwarePolycom UCS devices can utilize a variety of different file server platforms to store and manage both firmware packages and configuration files, no additional third-party software is required. Windows created a temporary paging file on your computer because of a problem that occured with your paging file. End user license agreement for polycom® uc software 3.3.0 configuration file conversion utility in. The phones will look for specific firmware files to perform an upgrade/downgrade and will download and upload configuration data in XML files. The provisioning server is not a specific product or solution, it is basically just a centrally-accessible file store which contains certain files that the devices are programmed to look for. When looking to provision any of these out-of-band features, like Paging, or when dealing with device firmware updates then it is required to deploy a centralized server to provide this today. VVX400) do also receive a lot of information in-band from the Lync Server, UCS devices contain a variety of configurable parameters available outside of what the Lync Server can provide itself. #Polycom configuration file generator tool updateCX600) receive all of their provisioning information and software update packages directly from a Lync server. ![]() Background Traditionally Lync Optimized devices (e.g. Also note that some of this guidance differs from instructions found in the official Polycom provisioning guides, most importantly the guidance to use a large number of parameters which no longer need to be defined for Lync interoperability as of the introduction of the. Instead this process alone can be used to deploy a basic provisioning server in a lab or testing environment when evaluating Polycom SIP phones, and much of the guidance contained reflects a non-production scenario. ![]() This article is not intended to replace or accompany any official Polycom documentation. By The process documented in this article can be used in any Lync 2010 or 2013 environment to setup a centralized provisioning server for managing Polycom SIP phones running Polycom Unified Communications Software (UCS). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |